Existing Tooling. Ready for production.

16 oz HDPE 70 mm Lotion Jar – 70-400 Special Finish

Drawing 14EE-EE137A-473

Empire-Owned Mold #4223 Existing 4-cavity tooling is ready for production planning.

This 16 oz HDPE Lotion Jar combines a wide-mouth 70-400 Special finish with a distinctive square footprint and durable 32-gram construction. The wide opening supports easy filling and convenient access to thicker products such as lotions, creams and body butters, while the flat sides provide useful space for branding and decoration.

Capacity
16 oz
Material
HDPE
Neck finish
70-400 Special
Minimum order
30,000 pieces

The mold is already built. Your program begins with a review of formulation compatibility, closure and liner requirements, filling conditions, decoration, production quantity and manufacturing schedule.

The Design and Tooling Advantage

What Makes This Mold Distinctive?

Wide-Mouth Access

The 70-400 Special finish creates a generous opening that supports efficient filling and convenient consumer access to thicker formulations such as lotions, creams, butters, masks and similar products.

Square Jar Footprint

The square footprint differentiates the package from a conventional round jar and creates defined flat surfaces for labels, graphics, ingredients, directions and product claims.

Existing Four-Cavity Tooling

Empire-owned Mold #4223 is already built with four cavities, providing an established production platform without requiring development of a completely new wide-mouth jar mold.

Container & Mold Specifications

Review the jar, closure, liner, formulation, decoration requirements and filling conditions together before approving the complete package for production.

Container style 70 mm Lotion Jar
Market Segments Personal Health & Beauty / Cosmetics / Nutraceutical
Application fit Lotions & Body Care / Creams & Body Butters / Hair Masks & Treatments / Cosmetic Products / Nutraceutical Powders & Specialty Products
Nominal capacity 16 oz / approximately 473 mL
Material High-Density Polyethylene (HDPE)
Footprint Square
Neck finish 70-400 Special
Closure configuration Custom 70-400 compatible closure
Listed jar weight 32 grams
Empire-owned mold 4223
Drawing number 14EE-EE137A-473
Tool cavities 4
Minimum order quantity 30,000 pieces
Tooling status Existing tooling; ready for production planning
Manufacturing process Extrusion blow molding (EBM)
Manufacturing Details

Extrusion Blow Molding (EBM)

Extrusion blow molding (EBM) is used to form this HDPE jar by expanding heated plastic inside the mold cavity to create the finished square wide-mouth geometry.

How the Process Works

HDPE resin is heated and extruded into a hollow tube called a parison. The mold closes around the parison, compressed air expands the plastic against the mold cavity, and the jar is cooled before release and trimming.

What to Validate

  • Product and HDPE compatibility
  • 70-400 Special closure fit and sealing performance
  • Liner and tamper-evident requirements
  • Filling behavior for creams, gels or powders
  • Label and decoration performance
  • Finished-package and distribution performance

Make the Package Work for Your Brand

Options to Discuss

  • Compatible 70-400 Special closures
  • Closure liners and sealing systems
  • Natural, white or custom HDPE colors
  • Pressure-sensitive labels
  • Compatible direct-print or sleeve decoration
  • Warehousing, inventory and scheduled-release programs

Potential Applications

  • Lotions
  • Body creams and body butters
  • Hair masks and treatments
  • Cosmetic creams and specialty beauty products
  • Nutraceutical powders and specialty products
  • Other compatible thick or scoopable formulations

From Existing Tooling to Your Production Run

Because the jar tooling already exists, a qualified program can begin with package validation and production planning instead of developing a completely new wide-mouth jar mold.

1. Discuss Your Needs

Share the product to be packaged, initial order quantity, annual volume, closure requirements, decoration goals and target timing.

2. Validate the Package

Review HDPE compatibility, the 70-400 Special closure system, liner requirements, filling conditions, decoration and finished-package performance.

3. Approve & Plan Production

Finalize the jar and closure configuration, quality requirements and production quantity, then establish manufacturing and delivery timing.

Frequently Asked Questions

Is the tooling for this jar already built?

Yes. Empire-owned Mold #4223 uses existing four-cavity tooling. A qualified program can move into package validation and production planning without first developing a completely new jar mold.

What is the minimum order quantity?

The minimum order quantity for this Empire-owned mold is 30,000 pieces. Final production requirements and scheduling are established during program review.

How much does this jar hold?

Mold #4223 produces a 16 oz jar, equivalent to approximately 473 mL.

What is distinctive about the 70 mm Lotion Jar?

The package combines a wide-mouth opening with a square footprint. The wide opening provides easy access to thicker products while the flat sides create defined surfaces for branding and decoration.

What neck finish does this jar use?

The jar uses a 70-400 Special finish. The mold documentation identifies a custom 70-400 compatible closure configuration. Closure fit, liner requirements and sealing performance should be confirmed with the intended formulation.

What is the manufacturing process?

Extrusion blow molding (EBM) is used to form this HDPE jar. Heated HDPE is extruded into a hollow parison, expanded against the mold cavity and cooled into the finished square jar geometry.

Which market segments are a fit for this jar?

Suitable market segments include Personal Health & Beauty / Cosmetics / Nutraceutical. The internal mold record specifically identifies cosmetics, beauty supply and personal care, and the mold is also included in Empire EMCO's nutraceutical mold portfolio.

What products could be packaged in this jar?

Potential applications include lotions, creams, body butters, hair masks, cosmetic treatments, nutraceutical powders and other compatible thick, scoopable or dry formulations.

Why use a wide-mouth jar for creams and body butters?

A wide opening can make filling easier and gives the consumer direct access to thicker products that are commonly scooped or applied by hand.

Can this jar be produced in custom colors?

Natural, white and custom HDPE colors can be evaluated based on resin requirements, production quantity and manufacturing capabilities.

Are finished jars available for immediate shipment?

Existing tooling does not mean finished jar inventory is automatically available. Production requires an approved package program, material planning, manufacturing scheduling and the applicable production quantity.

Let's Discuss Your Packaging Needs

Tell us what you are packaging, how many pieces you need, your closure and liner requirements, filling conditions, decoration needs and target timing. We'll help determine whether Mold #4223 is a fit for your program.

Discuss This Mold with a Specialist